TL;DR: Chemical & Mineral Industries Private Limited (CMIPL) is among the established hydrated lime suppliers Jodhpur relies on for effluent treatment plants, municipal water facilities, and industrial neutralization processes. It manufactures hydrated lime and quick lime for water treatment, acid neutralization, and heavy metal precipitation, from three lime kilns with a combined capacity of 1,200 TPD.

Why Industrial Water Treatment Plants Choose Hydrated Lime Suppliers Jodhpur

Sourcing calcium hydroxide from Rajasthan gives industrial facilities access to producers close to limestone reserves. For an effluent treatment plant (ETP) or common effluent treatment plant (CETP), chemical consistency from batch to batch is what makes alkaline dosing predictable.

Water treatment operations require lime primarily to raise pH, neutralize acidic waste streams, precipitate dissolved heavy metals, and condition industrial sludge. Hydrated lime, known chemically as calcium hydroxide or Ca(OH)2, offers practical handling benefits over quick lime because it is already slaked and stable under atmospheric conditions. Facilities choosing hydrated lime suppliers in Jodhpur benefit from road links from western Rajasthan to industrial corridors across Gujarat, Punjab, Haryana, and Uttar Pradesh.

Meeting Requirements as 300 Mesh Hydrated Lime Suppliers for Zero Liquid Discharge

Effluent plants operating under zero liquid discharge (ZLD) mandates operate with narrow process tolerances. In these installations, incomplete dissolution of lime creates unreacted grit, plugs mechanical clarifiers, and increases sludge generation. Treatment facilities seek 300 mesh hydrated lime suppliers to secure ultrafine particles that dissolve rapidly in reaction tanks, reducing chemical waste.

When hydrated lime powder attains this level of fineness, its specific surface area increases substantially, facilitating near-instantaneous hydroxide ion availability during neutralization. For facilities specifying high available Ca(OH)2 percentages above 90%, procurement managers should request individual lot certificates of analysis to verify the exact chemical assay before plant delivery.

Handling Dry Dosing and Flowability for Dry Hydrated Lime Bulk Suppliers

A recurring operational headache in large-scale ETPs involves pneumatic conveying and silo discharge. For instance, plants that consume 150 MT per month of lime for effluent treatment often encounter feed silo blockages, bridging, or ratholing when material absorbs moisture or exhibits broad particle size variance.

Consistent flowability in dry feed systems depends on uniform particle size distribution, low free moisture content, and the elimination of oversize grits that jam rotary airlocks and screw feeders. Dry hydrated lime should disperse smoothly through fluidizing pads and vibrating bin activators without compacting. Treatment managers evaluating suppliers should examine powder bulk density data and free moisture percentages, and ask how the packing protects dry powder from humidity during road transit.

Comparing Calcium Hydroxide and Quick Lime in Effluent Neutralization

Industrial facilities must determine whether their plant design calls for calcium oxide (quick lime) or slaked calcium hydroxide. Both materials deliver alkalinity, but their physical and thermodynamic properties differ significantly during industrial water treatment.

• Chemical form: quick lime is unslaked calcium oxide (CaO); hydrated lime is slaked calcium hydroxide (Ca(OH)2).

• Heat on contact with water: quick lime reacts exothermically; hydrated lime does not.

• Common sizes: CMIPL's quick lime comes in 5-25 mm, 25-75 mm, 0-3 mm, 200 Mesh and 300 Mesh; hydrated lime is a fine dry powder.

• On-site equipment: quick lime needs slakers and temperature-resistant tanks; hydrated lime needs a dry feeder or a simple slurry tank.

• Main handling hazard: quick lime can cause thermal burns on contact with moisture; hydrated lime is a caustic dust that irritates eyes and lungs.

• Reaction rate: quick lime needs slaking retention time; hydrated lime starts reacting at once.

While quick lime provides higher active oxide content per ton, hydrated lime avoids the capital expense, maintenance demands, and safety hazards of operating on-site slakers.

Sourcing High Purity Hydrated Lime in Rajasthan: Quality Specifications to Verify

Procuring high purity hydrated lime requires evaluation of laboratory parameters beyond basic mesh size. The performance of calcium hydroxide in effluent clarifiers directly tracks active available lime rather than gross calcium content.

Plant chemists and procurement managers should inspect three primary parameters:

• Available Ca(OH)2 content: the actual neutralizing strength of the powder, measured by wet chemical titration.

• Carbonate inerts and silica: uncalcined calcium carbonate cores and unreactive silica. Lower inert content means less sludge and less wear on transfer pumps.

• Moisture and insoluble residue: low free moisture keeps the powder flowing, and low acid-insoluble matter prevents abrasive damage inside dosing valves.

Buyers should always require batch-specific test reports from suppliers to verify conformity against plant specifications.

Bulk Supply and Inquiries for Treatment Facilities

Industrial water treatment requires consistent bulk supply to prevent plant shutdowns. A single disruption in lime deliveries can halt neutralization in an ETP, causing environmental permit violations. Buyers should agree packing and delivery arrangements with the supplier based on their plant's unloading setup.

CMIPL operates three lime kilns in Jodhpur with a combined capacity of 1,200 TPD. When asking for a quote, share your monthly consumption, the fineness you need and how your plant unloads. Pricing is quoted per order based on volume, delivery and specification.

Frequently asked questions

What happens if you mix quicklime with water instead of using hydrated lime?

Mixing quicklime (calcium oxide) with water triggers an exothermic reaction called slaking, releasing intense heat that can boil water and generate steam. The reaction produces hydrated lime (calcium hydroxide) slurry, which needs dedicated slaking equipment, heat-resistant tanks and safety controls that pre-slaked dry hydrated lime does not.

Is CMIPL in Jodhpur a reliable bulk supplier for quick lime and hydrated lime?

CMIPL manufactures and exports industrial minerals from Jodhpur, specializing in calcium carbonate, quick lime and hydrated lime, and supplies water treatment, steel and paper industries. Its three lime kilns have a combined capacity of 1,200 TPD.

Which industrial lime suppliers in Rajasthan supply 300 mesh hydrated lime with over 90% available Ca(OH)2?

Available Ca(OH)2 varies by limestone source and production run, so plant managers should request a batch-specific Certificate of Analysis from any supplier to verify purity for zero liquid discharge plants.

How do industrial effluent treatment plants avoid silo choking when dry dosing lime?

Facilities consuming high monthly volumes of dry lime should source uniformly milled powder with low free moisture and a tight particle size distribution. Silo choking is prevented by combining properly specified lime with bin aerators, mechanical vibrators, dehumidified silo vents, and calibrated rotary feed valves.

How is hydrated lime utilized in municipal and industrial wastewater treatment?

Hydrated lime is added to wastewater to neutralize acidic waste, raise pH to precipitate heavy metal ions as insoluble hydroxides, and assist chemical coagulation. It also aids sludge conditioning and pathogen reduction, helping plants meet discharge standards.

What packaging options are typically available for bulk hydrated lime from Jodhpur?

Packing depends on how your plant unloads. Confirm the packing arrangement and moisture protection directly with the supplier when you ask for a quote.

What is the minimum order quantity and pricing structure for commercial lime orders?

Lime pricing is quoted per order based on volume, fineness, packing and transport distance. Send your exact specification and monthly volume to the sales team for a quote.

Contact the CMIPL team in Jodhpur to discuss your water treatment specifications and request a quote for bulk hydrated lime.

Last updated: 2026-11-03